Seats „Kompakt“ without back rest

The seat is brought into the resting position by the means of springs that will automatically bring the seat back into resting position against the wall when not in use. Please consider that because of the construction of a wall mounted seat your wall has to be able to support the load of the seat and a person when the seat is being used.

If the durability of the desired area is unclear, it is better to decide for a seat with higher wall fittings or with a back rest as these models are more safely anchored and thus make the transfer of force and weight to the overall construction easier.

The seating area is brought into the resting position by the means of springs. In this model the seat will not fold back against the wall on its own but is locked in position by an integrated bump stop which keeps it in the vertical position. Because of this, the seat is also suitable for hard seating area materials such as wood or metal.
Please consider that your wall must be able to support the weight of the seat construction and a person when the seat is being used.
If the durability of the desired area is unclear it is better to decide for a seat with higher wall fittings or with a back rest as these models are more safely anchored and thus make the transfer of force and weight to the overall construction easier.

The seat is brought into the resting position by the means of springs that will automatically bring the seat back into resting position against the wall when not in use.

On both sides of the seat fixing points for a seatbelt are installed or by request and in exchange for an additional fee a 2-point-seatbelt can be included.

The seat is brought into the resting position by the means of springs that will automatically bring the seat back into resting position against the wall when not in use.

This seat is 50 mm (about 2 inches) slimmer than the model 007-05 and is thus even better suited for areas with limited available space.

The seating area is brought into the resting position by the means of springs. In this model the seat will not fold back against the wall on its own but is locked in position by an integrated bump stop which keeps it in the vertical position. Because of this, the seat is also suitable for hard seating area materials such as wood or metal.

This seat is 50 mm (about 2 inches) slimmer than the model 007-39 and is thus even better suited for areas with limited available space.

The seat is brought into the resting position by the means of springs that will automatically bring the seat back into resting position against the wall when not in use.

On both sides of the seat fixing points for a seatbelt are installed or per request and in exchange for an additional fee a 2-point-seatbelt can be included.

This seat is 50 mm (about 2 inches) slimmer than the model 007-62 and is thus even better suited for areas with limited available space.

The seat is brought into the resting position by the means of springs that will automatically bring the seat back into resting position against the wall when not in use.

The wall brackets are higher as the standard of the basic model 007-05. This means the extraction forces on the fitting are halved. Because of this, this seat is suitable for walls that are less capable of bearing much load.

The seat is brought into the resting position by the means of springs that will automatically bring the seat back into resting position against the wall when not in use.

The wall brackets are higher as the standard of the model 007-10. This means the extraction forces on the fitting are halved. Because of this, this seat is suitable for walls that are less capable of bearing much load.

The seating area is brought into the resting position by the means of springs. In this model the seat will not fold back against the wall on its own but is locked in position by an integrated bump stop which keeps it in the vertical position. Because of this, the seat is also suitable for hard seating area materials such as wood or metal.

The wall brackets are higher as the standard of the model 007-39. This means the extraction forces on the fitting are halved. Because of this, this seat is suitable for walls that are less capable of bearing much load.

The seat is brought into the resting position by the means of springs that will automatically bring the seat back into resting position against the wall when not in use.

This seat is another 50 mm (about 2 inches) slimmer than the model 007-10 even, so a total of 100 mm (about 4 inches) slimmer than model 007-05 and is thus especially suited for areas with limited available space.

The seat is brought into the resting position by the means of springs that will automatically bring the seat back into resting position against the wall when not in use.

This seat is 100 mm (about 4 inches) shorter than the model 007-10 and is thus suited for areas with extremely limited available space.

The seating area is brought into the resting position by the means of springs. In this model the seat will not fold back against the wall on its own but is locked in position by an integrated bump stop which keeps it in the vertical position. Because of this, the seat is also suitable for hard seating area materials such as wood or metal.

This seat is 50 mm (about 2 inches) narrower and 100 mm (about 4 inches) shorter than model 090-33 and thus available when available space is extremely limited.

The seat is brought into the resting position by the means of springs that will automatically bring the seat back into resting position against the wall when not in use.

This seat is 60 mm (2.4 inches) wider and 40 mm (1.6 inches) deeper than model 007-05 and is suitable for persons with a weight up to 250 kg (550 lb).

The seat is brought into the resting position by the means of springs that will automatically bring the seat back into resting position against the wall when not in use.

This seat is 120 mm (about 4.7 inches) longer than model 007-05 and thus suited if the seating area needs to be larger, for example for people in need of an oxygen tank.

However, this also means that the extraction forces working on the wall are also increased by 30%, meaning that the wall must be able to support more load.

The seating area is brought into the resting position by the means of springs, however, the strength of the springs is adjusted so that in this model the seat cannot fold back up of its own accord.

This seat is 200 mm (about 7.9 inches) wider than in model 007-05 and is thus suited if there needs to be a wider space.

A seat in this width can seat two people at once, which is why it is constructed in a way that makes it unable to fold up by itself and has to be returned to its upright position manually, although this action is aided and supported by the inbuilt springs so as to not demand too much physical strength from the user.

The extraction forces working on this seat if two people are to take seat on it are considerable and have to be supported by the wall and the construction. Please consult us if you have any questions.

The seat is brought into the resting position by the means of springs that will automatically bring the seat back into resting position against the wall when not in use.

The folded seat can be locked with a padlock.

This base stand only needs to be fixed on the ground, helping to support a fold down seat that is mounted to a wall that could not support the seat construction or the extraction forces otherwise.

The following models are compatible with this accessory:  007-05, 007-39, 007-42, 007-62 or 007-80.

The bearing capability of the floor have to be taken into consideration, especially if the foot is to be installed on a screed with underlying isolation.

The height adjustment is fastened to the wall with six screws. The height of the seat can be continuously adjusted in the margin of 80 mm (about 3.1 inches) by the means of two clamp levers.

This accessory is applicable to the following models: 007-05, 007-39, 007-42, 007-62 or 007-80.

The height adjustment is fastened to the wall with six screws. The height of the seat can be continuously adjusted in the margin of 80 mm (about 3.1 inches) by the means of two clamp levers.

This accessory is applicable to the following models: 007-37 or 007-66.