Benches „Woodie“, with beech wood sitting surface

Natural looks meet sitting comfort. The seating area as well as the back rest are made from one moulding, made from natural beechwood veneers soaked in synthetic resins and fused under high pressure (Pagwood as seen in durable school furniture).

Since in the compression process the beechwood is coated and thoroughly imbued with resin, it is permanently protected and is in no need for any after-treatment.

Practical application advice: In sheltered areas this material is suited for outside installation, with the exception of the model “beech light” since in this model the top most and the bottom layer are from a decorative foil and are not UV-light-proof.

The seat and back rest elements are highly flame retardant.

The sitting rows and benches are available as fold down seats or as rigid seats, with optional back rest as well as optional arm rests. As applications we offer side tables instead of arm rests or fitting frames with alternative measurements for the height of the seats or the spaces between individual seats as well as alternative means of installation (for example to be set on concrete).

If there are any questions about options or if you worry about the availability of options for you, please don’t hesitate to contact us. Any phone calls or emails asking for more details are absolutely non-binding and we are always looking forward to advise you.

Specifications and dimension sheets for download

Fold down sitting benches „Woodie“, with beech wood sitting surface, floor mounted

Single fold down sitting bench with beech wood sitting surface
model: 131-04

Bench with a sitting surface made from a synthetic-resin-sealed Pagwood-element. Other elements of the construction are metal. This seat is suited for the use in covered and sheltered outdoor areas. The Pagwood-element is highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating area is brought back into the resting position by means of springs.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Single fold down sitting bench with beech wood sitting surface and back rest
model: 131-03

Bench with a sitting surface and a back rest made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This seat is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating area is brought back into the resting position by means of springs.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Twosome fold down sitting bench with beech wood sitting surface
model: 132-04

Bench with sitting surfaces made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Twosome fold down sitting bench with beech wood sitting surface and back rest
model: 132-03

Bench with sitting surfaces and back rests made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Threesome fold down sitting bench with beech wood sitting surface
model: 133-04

Bench with sitting surfaces made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Threesome fold down sitting bench with beech wood sitting surface and back rest
model: 133-03

Bench with sitting surfaces and back rests made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Foursome fold down sitting bench with beech wood sitting surface
model: 134-04

Bench with sitting surfaces made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Foursome fold down sitting bench with beech wood sitting surface and back rest
model: 134-03

Bench with sitting surfaces and back rests made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page

Fold down sitting benches „Woodie“, with beech wood sitting surface, wall mounted

You can find single wall mounted fold down sitting benches with or without back rest here:
Products - Fold down seats - Wood seats „Woodie“ - With beech sitting surface

Twosome fold down sitting bench with beech wood sitting surface
model: 152-04

Bench with sitting surfaces made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
to the details page
Twosome fold down sitting bench with beech wood sitting surface and back rest
model: 152-03

Bench with sitting surfaces and back rests made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
to the details page
Threesome fold down sitting bench with beech wood sitting surface
model: 153-04

Bench with sitting surfaces made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
to the details page
Threesome fold down sitting bench with beech wood sitting surface and back rest
model: 153-03

Bench with sitting surfaces and back rests made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
to the details page
Foursome fold down sitting bench with beech wood sitting surface
model: 154-04

Bench with sitting surfaces made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
to the details page
Foursome fold down sitting bench with beech wood sitting surface and back rest
model: 154-03

Bench with sitting surfaces and back rests made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
to the details page

Rigid sitting benches „Woodie“, with beech wood sitting surface, floor mounted

Single rigid sitting bench with beech wood sitting surface
model: 131-14

This bench is fitted with a seating area that isn’t fashioned to fold down. Sitting surface is made from a synthetic-resin-sealed Pagwood-element. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-element is highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Single rigid sitting bench with beech wood sitting surface and back rest
model: 131-13

This bench is fitted with a seating area that isn’t fashioned to fold down. Sitting surface and a back rest are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Single rigid sitting bench with beech wood sitting surface and arm rests
model: 131-24

This bench is fitted with a seating area that isn’t fashioned to fold down. Sitting surface is made from a synthetic-resin-sealed Pagwood-element. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-element is highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Single rigid sitting bench with beech wood sitting surface, back rest and arm rests
model: 131-23

This bench is fitted with a seating area that isn’t fashioned to fold down. Sitting surface and a back rest are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Twosome rigid sitting bench with beech wood sitting surface
model: 132-14

This bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Twosome rigid sitting bench with beech wood sitting surface and back rest
model: 132-13

This bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces and back rests are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Twosome rigid sitting bench with beech wood sitting surface and arm rests
model: 132-24

This bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Twosome rigid sitting bench with beech wood sitting surface, back rest and arm rests
model: 132-23

This bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces and back rests are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Threesome rigid sitting bench with beech wood sitting surface
model: 133-14

This bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Threesome rigid sitting bench with beech wood sitting surface and back rest
model: 133-13

This bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces and back rests are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Threesome rigid sitting bench with beech wood sitting surface and arm rests
model: 133-24

This bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Threesome rigid sitting bench with beech wood sitting surface, back rest and arm rests
model: 133-23

This bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces and back rests are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Foursome rigid sitting bench with beech wood sitting surface
model: 134-14

This bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Foursome rigid sitting bench with beech wood sitting surface and back rest
model: 134-13

This bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces and back rests are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Foursome rigid sitting bench with beech wood sitting surface and arm rests
model: 134-24

This bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Foursome rigid sitting bench with beech wood sitting surface, back rest and arm rests
model: 134-23

This bench is fitted with seating areas that aren’t fashioned to fold down. Sitting surfaces and back rests are made from synthetic-resin-sealed Pagwood-elements. Other elements of the construction are metal. This unit is suited for the use in covered and sheltered outdoor areas. The Pagwood-elements are highly flame retardant. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for this unit or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page

expand all close all

BLECH & TECH GmbH
Niederwaldstraße 4
79336 Herbolzheim, Germany

+49 (0) 76 43 / 33 38 95 - 0
+49 (0)76 43 / 33 38 95 - 11
nfblch-tchd